VINTAGE GUITARS for sale
- STUDY GUITAR JUAN ESTRUCH BARCELONA
 |
 |
 |
Year of construction: ca 1960 Scale length: 650 mm Body length: 490 mm Width at lower bout: 365 mm Width at the waist: 234 mm Action: 3,5 mm bass and discant Top: spruce Back and ribs: mahogany? Finger board: ebony |
 |
| The original heavy paint has been completely removed and replaced with a shellac polish. There is one crack in the top of approx. 9 cm to the left of the finger board and another crack of approx. 28 cm extending from the sound hole to the end block in the middle of the top. In the back is a crack of approx. 12 cm. All cracks are stabilized. |
PRICE: 300 EURO
- TORRES MODEL TELESFORO JULVE VALENCIA
 |
 |
 |
Year of construction: ca 1945 Scale length: 655 mm Body length: 480 mm Width at the lower bout: 350 mm Width at the waist: 230 mm Action: 3,5 mm bass, 2,9 mm discant Top: spruce Back and ribs: ? Finger board: ? |
 |
| The inclination of the neck has recently been reset and the finger board newly fretted. No cracks. |
PRICE: 1.000 EURO
CONCERT MODEL
- Currently available
 |
 |
 |
Scale length: 650 mm Top: European spruce from the Dolomites Back and ribs: Indian rosewood Neck: cedrela Finger board: ebony Bridge: Madagascar rosewood Headpiece veneer: Indian rosewood Tuning machines: Irving Sloane French polish |
 |
PRICE: 2,500€ (student version 2,300 € on order)
DOUBLE TOP available
 |
 |
 |
Scale length: 650 mm Top:_ceder/Nomex/spruce_ Back and ribs: Pao Ferro Neck: cedrela Finger board: ebony Bridge: Madagascar rosewood Headpiece veneer: Pao Ferro Tuning machines: Rubner French polish |
 |
PRICE: 2,750€
 |
GENERAL CHARACTERISTICS Body length: 490 mm Width at lower bout: 370 mm Width at waist: 242 mm Scale length: 650 mm, other scale lengths on request Top: spruce, Sitka or ceder, or ceder/Nomex/spruce Back and ribs: Indian rosewood, maple; other woods are possible on request Finger board: ebony Neck: cedrela |
TORRES MODEL
Spruce
 |
 |
 |
Scale length: 650 mm Top: European spruce Back and ribs: Indian rosewood Tuning machines: Gotoh 35G1800 Neck: cedrela Finger board: ebony Bridge and headpiece veneer: Indian rosewood French polish |
 |
PRICE: 2,300 €
Currently available
Ceder
 |
 |
 |
Scale length: 650 mm Top: ceder Back and ribs: Indian rosewood Neck: cedrela Tuning machines: Gotoh 35G1800 Finger board: ebony Bridge: Madagascar rosewood Headpiece veneer: Indian rosewood French polish |
 |
PRICE: 2,300 €
 |
GENERAL CHARACTERISTICS |
At the occasion of my engineering studies in Ghent, I studied the classical guitar at the academy of music in Ledeberg with Mr Roumen and was awarded the diploma classical guitar higher degree. Then I joined for about one year the guitar class of Nicolas Alfonso (Nicolas Perez-Fernandez) at the Music Academy of Uccle . When I got more time I joint the classical guitar building workshops under the guidance of Walter Verreydt at the Centre for musical instruments construction (CMB) in Puurs for 4 years.
Since mid 2011 I build my classical guitars in my workshop located in Ronse in the middle of the Flemish Ardennes.
All my classical guitars are completely hand made in the traditional way from first class materials. The offer includes the concert guitar model and the slightly smaller Torres model. Both models can be built also with additional bass strings, for example as 11-strings guitar (7 + 4 strings).
Recently the offer has even been completed with a double top guitar of which the top is composed of ceder / Nomex and spruce.